Stoneware Elements

  • 3" x 9" field in flannel with KALLISTA Laura Kirar Vir Stil console with towel bar, basin set with lever handles, wall sconce, tilting mirror, ANN SACKS Fairchild toothbrush holder, and soap dish (photographer: Phillip Ennis, designer: Jason Trotter)

Ann Sacks Collection's stoneware body allows for larger formats up to 9" x 9". Unique and unexpected in its beauty and depth, the glazes take on their own character dependent upon the heat of the kiln, thereby producing the uneven, interactive surfaces so coveted today.


Field Tiles

  • Stoneware Elements Hexagon

    Sizes

    • 4" x 4" x 3/8"
  • Stoneware Elements Rectangle Field

    Sizes

    • 1" x 3" x 3/8"
    • 4" x 8" x 3/8"
    • 3" x 9" x 3/8"
    • 3" x 6" x 3/8" beveled
    • 2" x 8" x 3/8"
    • 2" x 4" x 3/8"
    • 1" x 6" x 3/8"
    • 1" x 2" x 3/8"
    • 1" x 4" x 3/8"
    • 1" x 9" x 3/8"
    • 2" x 6" x 3/8"
    • 3" x 6" x 3/8"
    • 3" x 8" x 3/8"
    • 4" x 6" x 3/8"
    • 6" x 9" x 3/8"
    • 4" x 9" x 3/8"
  • Stoneware Elements Square Field

    Sizes

    • 6" x 6" x 3/8" v fluted
    • 6" x 6" x 3/8"
    • 3" x 3" x 3/8" beveled
    • 2" x 2" x 3/8"
    • 1" x 1" x 3/8"
    • 3" x 3" x 3/8"
    • 4" x 4" x 3/8"
    • 9" x 9" x 3/8"
    • 8" x 8" x 3/8"

Trims & Moldings

  • Stoneware Elements Bullnose

    Sizes

    • 6" x 6" x 5/8" large radius bullnose
    • 2" x 2" x 13/16" small radius bullnose up
    • 2" x 2" x 13/16" small radius bullnose out
    • 2" x 6" x 13/16" small radius bullnose
    • 4" x 6" x 11/16" medium radius bullnose
    • 4" x 2" x 3/8" surface bullnose trim on 2" side
    • 3" x 6" x 3/8" surface bullnose trim on 6" side
    • 3" x 3" x 3/8" double
    • 2" x 9" x 3/8" surface bullnose trim on 9" side
    • 2" x 6" x 3/8" surface bullnose trim on 6" side
    • 2" x 4" x 3/8" surface bullnose trim on 2" side
    • 2" x 2" x 3/8" surface
    • 3" x 6" x 3/8" double bullnose left
    • 3" x 6" x 3/8" double bullnose right
    • 6" x 6' x 3/8" double bullnose parallel
    • 1" x 1" x 3/8" surface
    • 1" x 3" x 3/8" surface bullnose trim on 3" side
    • 1" x 2" x 3/8" surface bullnose trim on 2" side
    • 1" x 6" x 3/8" surface bullnose trim on 6" side
    • 1" x 4" x 3/8" surface bullnose trim on 4" side
    • 2" x 6" x 13/16" c cap surface bullnose
    • 1" x 9" x 3/8" surface bullnose trim on 9" side
    • 2" x 6" x 13/16" c cap surface bullnose in molding corner
    • 2" x 2" x 13/16" c cap surface bullnose down molding corner
    • 2" x 6" x 13/16" c cap surface bullnose out/end right molding corner
    • 2" x 6" x 13/16" c cap surface bullnose out/end left molding corner
    • 2" x 2" x 3/8" double
    • 2" x 2" x 13/16" c cap surface bullnose up molding corner
    • 2" x 6" x 5/8" large radius bullnose in
    • 2" x 4" x 3/8" surface bullnose trim on 4" side
    • 6" x 6" x 5/8" large radius bullnose up
    • 2" x 6" x 5/8" large radius bullnose out
    • 1-1/2" x 4" x 11/16" medium radius bullnose out
    • 4" x 4" x 11/16" medium radius bullnose up
    • 4" x 4" x 11/16" medium radius bullnose down
    • 1-1/2" x 4" x 11/16" medium radius bullnose in
    • 4" x 6" x 3/8" surface bullnose trim on 6" side
    • 4" x 8" x 3/8" surface bullnose trim on 8" side
    • 2" x 2" x 13/16" small radius bullnose down
    • 2" x 2" x 13/16" small radius bullnose in
    • 6" x 3" x 3/8" surface bullnose trim on 3" side
    • 6" x 4" x 3/8" surface bullnose trim on 4" side
    • 4" x 9" x 3/8" surface bullnose trim on 9" side
    • 6" x 2" x 3/8" surface bullnose trim on 2" side
    • 6" x 9" x 3/8" surface bullnose trim on 9" side
    • 4" x 4" x 3/8" surface
    • 6" x 6" x 3/8" surface
    • 6" x 6" double
    • 8" x 4" x 3/8" surface bullnose trim on 4" side
    • 8" x 3" x 3/8" surface bullnose trim on 3" side
    • 8" x 2" x 3/8" surface bullnose trim on 8" side
    • 4" x 4" x 3/8" double
    • 9" x 9" x 3/8" double
    • 9" x 9" x 3/8" surface
    • 8" x 8" x 3/8" double
    • 8" x 8" x 3/8" surface
    • 3" x 6" x 3/8" surface bullnose trim on 3" side
    • 3" x 3" x 3/8" surface
    • 2" x 8" x 3/8" surface bullnose trim on 8" side
    • 6" x 6" x 5/8" large radius bullnose down
    • 3" x 8" x 3/8" surface bullnose trim on 8" side
    • 3" x 9" x 3/8" surface bullnose trim on 9" side
  • Stoneware Elements Cove

    Sizes

    • 2" x 6" x 11/16" large radius cove in molding corner
    • 1" x 6" x 15/16" cove
    • 2" x 6" x 11/16" large radius cove out molding corner
    • 5/16" x 15/16" x 15/16" cove in/up molding corner
    • 1-5/8" x 4" x 11/16" medium radius cove in molding corner
    • 4" x 6" x 11/16" medium radius
    • 2" x 2" x 15/16" cove out/down molding corner
    • 1" x 1" x 1-5/16" small radius
    • 1-5/8" x 4" x 11/16" medium radius cove out molding corner
  • Stoneware Elements Half Round

    Sizes

    • 1" x 6" x 1" large half round out/end molding corner
    • 2" x 2" x 1" large half round down/up molding corner
    • 5/8" x 6" x 5/8" small half round out/end molding corner
    • 1" x 6" x 1" large
    • 1" x 6" x 1" large half round in molding corner
    • 5/8" x 6" x 11/16" small half round in molding corner
    • 1-1/2" x 1-1/2" x 5/8" small half round down/up molding corner
    • 5/8" x 6" x 5/8" small
  • Stoneware Elements Liner

    Sizes

    • 3/4" x 6" x 7/16" thick out/end
    • 3/4" x 6" 7/16" thick
    • 1-1/4" x 6" x 3/8" large flat
    • 1" x 6" x 3/8" medium flat
    • 1/2" x 6" x 3/8" small flat
    • 2" x 2" x 1/2" thick down/up
    • 3/4" x 6" x 5/8" thick in
  • Stoneware Elements Quarter Round

    Sizes

    • 1-13/16" x 1-13/16" x 3/8" s 90 degree angle in corner
    • 1-1/4" x 6" x 3/4" large
    • 1-13/16" x 1-13/16" x 1-13/16" s 90 degree angle out corner
    • 1" x 6" x 1/2"
    • 1-1/2" x 1-1/2" x 3/4" large out/beak corner
    • 2" x 2" x 1/2" quarter round in corner
    • 1" x 1" x 1/2" out/beak corner
    • 2-1/2" x 2-1/2" x 3/4" large in corner
    • 2-1/2" x 2-1/2" x 3/4" large sink in corner
    • 2" x 2" x 1/2" sink in corner
    • 1-13/16" x 6" x 1-13/16" s 90 degree angle
  • Stoneware Elements Trim 2

    Sizes

    • 2" x 2" x 1-1/4" trim 2 up molding corner
    • 2" x 8" x 1-1/4" trim 2 out/end right molding corner
    • 2" x 8" x 1-1/4" trim 2 out/end left molding corner
    • 2" x 8" x 1-1/4" trim 2 in molding corner
    • 2" x 8" x 1-1/4" trim 2
    • 2" x 2" x 1-1/4" trim 2 down molding corner

  • 2" x 9" and 3" x 9" fields in currant
  • 3" x 6" beveled field in ice
  • 3" x 6" field in new fog
  • 4" x 4" field, 4" x 4" hexagon field, and 1/2" x 6" small flat liner molding in pine


Overview

field tiles range from $29.92 sf to $191.25 sf
trims range from $11.95 lf to $38.94 lf

Special Order
SKU: AS9504FLD/AS9504MLD

  • MADE IN USA

Recommended Use & Requirements

All Uses

  • wet area
  • residential floor
  • high-traffic
  • wall
  • All indoor vertical and horizontal applications
  • Suitable for outdoor vertical use department upon climate and method of installation